Supplier >
KERO QUALITY B.V.
Print…
You Searched For:
26 results were found
KERO QUALITY B.V.
Catalog Number:
(82010-692)
Supplier:
Labconco
Description:
Solid Epoxy Dished Work Surface for 3' Models
Supplier:
Labconco
Description:
These low-profile enclosures provide user protection by keeping powders, particulates, and fumes contained during weighing procedures
Supplier:
Labconco
Description:
Safely store and vent solvents and other highly flammable liquids.
Supplier:
Labconco
Description:
For 15.2cm I.D. hose. An accessory for use with XPert* Balance Enclosures, Protector* XVS Ventilation Stations, and Protector Workstations.
Supplier:
Labconco
Description:
One 8" filler panel is included with each storage cabinet to extend cabinet depth to 30" and to enclose the utility chase behind the cabinet.
Supplier:
Labconco
Description:
There are many accessories available for customizing Protector® Laboratory Hoods including Service Fixture Kits, Duplex Receptacle Kits and Guardian™ Airflow Monitors.
Supplier:
Labconco
Description:
Popular models of Protector® Premier® Laboratory Hoods and supporting matching work surfaces (sold separately) are available from VWR® stock for immediate shipment
Supplier:
Labconco
Description:
Fiberglass blowers are recommended for fume hood exhaust systems in moderate to highly corrosive conditions
Catalog Number:
(89033-090)
Supplier:
Labconco
Description:
Storage cabinet, Solvent vent kit
Supplier:
Labconco
Description:
Standard cabinets support Labconco® laboratory hoods and can be used for storage of small laboratory instruments.
Supplier:
Labconco
Description:
Safely store and vent acids and other highly corrosive liquids.
Catalog Number:
(82010-690)
Supplier:
Labconco
Description:
Molded from special formulation of epoxy resins to withstand chemicals. Dished and contoured to conform the interior liner of 0.6m (2ft.) Protector* XVS Ventilation Station to contain spills. Radiused front edge enhances containment.
Supplier:
Labconco
Description:
Black solid epoxy, 48inch w x 36inch l x 1.25inch thick. Includes left rear cutout, cupsink and cupsink cover. EA.
Supplier:
Labconco
Description:
Black solid epoxy, 72inch w x 30inch d x 1.25inch thick. Includes left rear cutout, cupsink and cupsink cover. EA.
Catalog Number:
(15202-504)
Supplier:
Labconco
Description:
Storage cabinet, Vent kit
Catalog Number:
(82010-632)
Supplier:
Labconco
Description:
Portable exhausters for use with XPert™ balance enclosures and weigh boxes, Precise™ HEPA-filtered glove boxes, and Protector™ XVS ventilation stations, demonstration hoods, and workstations. Exhausters use carbon and/or HEPA filters to remove hazardous powders, particulates, or vapors from the exhaust air stream, returning filtered air to the environment. No ducting to the outside is required.
Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the
 is still displayed and you need assistance, please call us at 1-800-932-5000.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the
is still displayed and you need assistance, please call us at 1-800-932-5000.
This product is marked as restricted and can only be purchased by approved Shipping Accounts. If you need further assistance, email VWR Regulatory Department at Regulatory_Affairs@vwr.com
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at 1-800-932-5000.
|
|||||||||
List View
